Service manual

Wheels, Axles & Chains Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
WA-46
On dual seal greasable flanges:
There are 2 different styles of grease seals used in the dual seal outer bearing greasable
flange. Photo WA-108 These grease seals are differentiated in size & by 2 part numbers.
Assemble the seals into the flange accordingly referring to the illustration in your
corresponding parts manual.
1. Lightly coat the perimeter of the outer
grease seal with red 271 LOCTITE
and install at the arbour press with an
installation tool. Be sure it is seated
properly. Photo WA-109
2. Apply red 271 LOCTITE to the inner
seal as above, and install at the arbor
press in the same manner, ensuring it
has seated to the shoulder within the
outer greasable flange. Photo WA-110
3. Using a center punch and hammer, lightly stake
around the perimeter of the inner seal in as many
places as were used previously. Photo WA-110
Installing an Axle (Without Bearing Extension)
1. Perform the servicing procedure, Installing the In-
ner Bearing Assembly, if necessary.
2. Locate the axle and stand it upright on a clean work
bench. Photo WA-111
WA-108
WA-109
WA-110
WA-111