User's Manual

[EN]
Accessories
TWS earbuds x 1
Charging cable x 1
User manual x 1
Usage
Turn on:
connected with one another.
Turn off:
There are two ways to turn off the earbuds. Once the earbuds have powered down, you will hear
Method 1: Put the earbuds into the charging cradle. The earbuds will turn off and go into charging
them o.
Note: If you turn off only one of the earbuds, the other one will remain connected with the
mobile device and carry on working.
Earbud Pairing
earbuds will become the master earbud.
not display a light.
Note: You can change which earbud is the master whenever you like. While the earbuds are
you want to be master briefly twice. It will become the master.
phone, iPad or other Bluetooth-enabled device, search ‘TWS 12619’ and click on it to connect.
When the earbuds connect with your device successfully via Bluetooth, you will hear
on your device and enjoy it through the earbuds.
Note:
long as 'TWS 12619’ has not been deleted from your Bluetooth list on the device.
established within 3 minutes.
music.
Next song:
skip to the next song. (Beware: if you press and hold for 3 seconds, the earbuds will turn o.)
Answering a call:
answer the call.
Hanging up:
Recall:
phone’s call list.
Stop dialling:
Decline a call:
Charging
Charging the charging cradle: Use the type C charging cable provided to connect the charging
cradle to the power supply. The charging cradle’s blue LEDs will flash while it is charging. Four blue
LEDs will be shown when it is fully charged.
Charging the earbuds: Just place the earbuds into the charging cradle. The earbuds will
The earbuds will display a red LED light while they are charging, and this will turn off when they are
fully charged.
Bluetooth version: V5.0
Bluetooth working range: 10m
SNR: 60db
Frequency response: 20Hz – 20kHz
BT frequency: 2402-2480MHz
DC in 5V 1A
INSTRUCTION MANUAL
ModelEB0197
90mm
70mm 70mm 70mm
Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods.
- - -

Summary of content (2 pages)