User`s manual

Tracker3 User’s Manual 40
PROFILE 1 | 2
Selects the configuration profile to use. If profile switching is enabled, the
profile switching parameters will still be in effect.
PROPWPT on|off
Enables proprietary waypoint strings. With PROPWPT OFF , output formats
are $GPWPL and $PGRMW. With PROPWPT ON , $PKWDWPL, $GPWPT,
and $PMGNWPL are output.
PTTINPUT on|off
Enables PTT input for mic encoder opration. A position packet will be
transmitted when the mic PTT is released. OT3m model only.
PULSE <0-255> (seconds)
Activates power output for specified duration.
PWAUTH on|off
Enables one-time password authentication.
QUIET <0-255>
Time channel must be free before transmission can occur, in 1/64 second
units.
REARM <0-255> (milliseconds)
Specifies minimum time between counter inputs. May be used for switch
de-bouncing.
REPLY <message> (local only)
Sends a text message to the last person who sent a message addressed to
this unit's callsign
Return value: 0 = No message received to reply to, 1 = Message received
RETRIES <0-255>
Number of times to retransmit an outgoing message.
RETRYTIME <0-255> (seconds)
Time between message retry attempts - interval increases by this value
with each transmission.