User`s manual

Tracker3 User’s Manual 35
CALIBRATE LOW | HIGH | ALT | PACKET (local only)
Calibration functions to set demodulator tuning and transmitter
deviation. 'Low' transmits a 1200 hz tone, 'high' transmits a 2200 hz tone,
'alt' transmits alternating 1200 and 2200 hz tones, 'packet' sends a test
packet repeatedly, and 'tune' displays a tuning indicator for adjustment of
the demodulator. Use the '[' and ']' keys for coarse adjustment of the
transmit audio level, and '-' and '+' for fine adjustment. Press any other
key to exit calibration mode.
CDINVERT on|off
Inverts carrier detect input polarity.
CLIMB on|off
Enables rate-of-climb indication. Climb rate is reported in feet per minute,
positive or negative, immediately following the altitude. Available only
in Garmin binary mode.
CNTRESET on|off
Causes counter to reset with each transmission. See accessory port
information.
COMMENT <string>
Sets beacon text / comment string, up to 64 characters.
COMPRESS on|off
Enables Base91 compressed format for position transmissions.
CONFIG 1|2 (local only)
Selects configuration profile to modify.
CONVERSE (local only)
In converse mode, text entered at the console is transmitted when the
ENTER key is pressed. Hit CTRL-C to exit. The command ‘K’ may also
be used to enter CONVERSE mode.
COUNTER on|off
Transmits counter value in status text.