User`s manual

Tracker3 User’s Manual 17
KISS – In KISS mode, a PC or other host device sends and receives raw AX.25
packets. Keep in mind that even with one or both ports in KISS mode, the
Tracker3 will continue to perform its other functions, including messaging and
digipeating. The host should use a different callsign/SSID combination to avoid
interference.
WS2300 – Supports LaCrosse WS-2300 series weather stations at 2400 baud,
again ignoring manual baud rate settings.
DAVIS – Supports Davis Vantage Pro series weather stations.
TEXT – Functions like ‘converse’ mode. Each line of text is sent as a plain text
packet when a carriage return is received. Pressing control-C twice will exit
TEXT mode.
FLOW – Valid only for port B, this setting causes the port B pins to function as
CTS/RTS flow control signals for port A. Not applicable for the T3-135.
The USB port normally functions in command console mode. If the USBKISS
option is enabled, the USB port is placed in KISS mode. To exit KISS mode from
a terminal program, hit control-C three times.