Use and Care Guide

How to Assemble,
Disassemble, & Clean
Your Pet Feeder
Food Bucket
1. To assemble, align food bucket with slots in
the main body and press down.
2. To disassemble, hold both sides of the food
bucket and lift upwards.
Adapter/Battery Installation
1. Open the battery compartment at the bottom of
the feeder.
2. Install three (3) alkaline D batteries. Make sure
battery wrappings are not torn and that you match
the positive and negative polarities with the
markings in the compartment.
3. Plug the DC adapter into the adapter port at the
rear of the main body.
4. Connect other end to a power outlet.
5. Make sure device is turned on.
NOTE: Users can use the app when the feeder is
plugged into a power outlet, but the feeder can’t be
operated from the app in battery mode. The feeder
will follow the schedule that was set before the
power adapter was disconnected from the feeder.
NOTE: If you are having trouble properly placing food
bucket in feeder, please rotate the upper impeller inside of
the food compartment manually to properly t the bucket.
Always have the pet feeder plugged in. Battery
mode should be used as a secondary, backup
power supply like in the event of a power outage.
NOTE: Install batteries before connecting the adapter.
Batteries should be installed for a backup option in case
of power outage or adapter is plugged out.
Battery Compartment
6