User manual

RP6 ROBOT SYSTEM - 1. Introduction
1.1. Technical support
You may contact our support team via internet as follows (please read
this manual completely before contacting the support! Reading
the manual carefully will answer most of your possible questions
already! Please also read appendix A – Troubleshooting):
- through our forum: http://www.arexx.com/forum/
- by E-Mail: [e-mail]
You will find our postal address in the legal notice at the beginning of
this manual.
All software updates, new versions of this manual
and further informations will be published on our
homepage:
http://www.arexx.com/
and on the robot's homepage:
http://www.arexx.com/rp6
1.2. Scope of delivery – RP6
You should find the following items in your RP6 box (RP6v2 s. next page):
● Completely assembled Robot
● RP6 USB Interface
● USB A->B cable
● 10pin flat cable
● RP6 CD-ROM
● Quickstart manual
● RP6 Experiment board
● 4 pcs 25mm M3 distance bolts
● 4 pcs M3 screws
● 4 pcs M3 nuts
● 4 pcs 14pin connectors
● 2 pcs 14pin flat cable
- 7 -