User manual

Legal Notice
©2007 - 2012 AREXX Engineering
Nervistraat 16
8013 RS Zwolle
The Netherlands
Tel.: [phone]
Fax.: [phone]
"RP6 Robot System" is a trademark of
AREXX Engineering.
All other trademarks used in this document
belong to their owners.
This manual is protected by copyright. No
part of it may be copied, reproduced or dis-
tributed without the prior written permission
of the editor!
Changes in product specifications and scope
of delivery are reserved. The contents of
this manual may change at any time without
prior notice.
New versions of this manual will be pub-
lished on our website:
http://www.arexx.com/
Although we carefully control contents, we do not assume any liability for the contents of
external websites referred to in this manual. Solely the operators of these pages bear re-
sponsibility for the contents.
Limitations in Warranty and Liability
The warranty of AREXX Engineering is limited exclusively to the exchange of devices within
legal warranty periods in case of hardware defects, such as mechanical damage, missing or
wrong assembly of electronic components, excluding socketed circuits. To the extent per-
mitted by applicable law, AREXX Engineering assumes no liability for any damage resulting
directly or indirectly from the use of the device.
Irreversible modifications (e.g. soldering additional components, drilling holes, etc.) or
damaging the devices by neglecting the instructions in this manual will void warranty.
No warranties can be given with respect to individual requirements to the included soft-
ware, nor to the error-free and uninterrupted operation of the software.
Additionally, the software may be modified and loaded onto the system by the user. There-
fore the user is responsible for software quality and the overall system performance of the
robot.
AREXX Engineering guarantees the functionality of supplied example software as long as
the specified operating conditions are respected. If the devices are operated beyond these
conditions and the device or the PC-software is malfunctioning or gets defective, the cus-
tomer will be charged for all service costs, repairs and corrections. Please also pay atten-
tion to the corresponding license agreements on the CD-ROM!
Symbols
The following Symbols are used in this manual:
The “Attention!” Symbol is used to mark important details.
Neglecting these instructions may damage or destroy the ro-
bot and/or additional components and you may risk your own
or others health!
The "Information" Symbol is used to mark useful tips and
tricks or background information. In this case the information
is to be considered as “useful, but not necessary”.