User manual

AREXX Engineering & JM3 Engineering
Version: 1.43 Nov 9
th
, 2014 page: 12
The software can be complied with the GNU AVR and the source code can be edited with
Notepad+ or Visual Studio Express (free download at Microsoft) – the makefile is included.
The GCC Tool chain is included – see avr-gcc-4.8.1.zip. Extract to C:\GCC and run addpath.exe
to make the correct settings automatically. More detail how to install the Tool Chain please refer
to avr-gcc-vs.pdf.
3.1 Asuro xTend
The Asuro xTend Board is used to control all sensor data, buttons, LEDs, the display and give
commands to the Asuro or read data from the Asuro.
The provided base SW should be used for all applications and tasks you will program and of
course a complete hardware driver library (display, ADC, timer, I2C, UART, LED, key drivers are
included.
Programming of the new application s/w will be performed via the new programming tool – the
JM3 Robot Tool or the command line based version – the JM3 MultiLoader (which can be
used a plug-in for Visual Studio) and the Micro USB port. The self-programming interface is very
fast and changes only modified flash blocks!