Instructions

50
BS1500GP(R)S communicating to an external website: e.g.
www.multilogger.nl
To setup connection the following steps are required:
1. Visit www.multilogger.nl and register for an account and a login
2.Proceedbyenteringtheadminpageandstartthelink‘quicksetup’.
3.Registeryoursite(bychoosingthesite’sname,enteringthe
sensors’ID’stobedisplayedatyoursite.Alsoyouwillhaveto
specify the sensor type). Proceed by selecting the following page.
4.NowstorethepreviouslygeneratedruleleatyourownPCby
clickingtherulele’slink.
5.Completethecongurationbyuploadingtherulele,whichhad
been stored at your PC, to the BS1500. Login to the BS-1500 at
your browser and navigate to the Administration > Messenger to
uploadtheletoyourBS1500.Touploadtheleyoumayalsouse
thecongurationtoolintheMultilogger’ssoftware.Ifrequiredyou
mayalwaysmodifytherulele.
Attention: The Rulele will not need any modications if extra
sensors are to be added to the system!
SyncFilecong tool
E
N
G
L
I
S
H