Instructions

Introduction

The BS1500 is a receiver station for the AREXX Multi Logger system. Like

the BS510 station, the BS1500 receives sensor and GPS data via wireless

transmission and sends these data via a USB interface to a PC. The GPRS/

GSM link enables the BS1500 to send measured values via GPRS to a remote

webserver/website. The BS1500 can also send alerts using SMS or email,

denedbyuser-deneablerules.

Software Installation

Prior to using the BS1500 via USB, you have to install the supplied software

on your PC. Insert the supplied CD-ROM into the CD drive of your PC (always

check the latest Software version on our website). After insertion the instal-

lation wizard will appear. If the automatic set up has been disabled in your

Windowssoftware,youcanactivatethewindowbyopeningtheExplorerle,

gototheCDdriveanddouble-clickonthedefault.htmle.

Select your language on the installation screen and then select the installa-

tion option. Follow the instructions on the screen.

User manual for the Multilogger-Software

All user information for the Multilogger-Software may be found in the

software’s help-section.

Please update regular the multiloggersoftware!

SEE: WWW.AREXX.COM

Installation of the receiver

Once you have installed the software and connected the BS1500 to the

7V - 30V power supply, you can connect the receiver module (BS1500) to

your computer via the supplied USB lead. Windows will now start installing

the required RF_USB driver. Depending on your Windows version, the instal-

lation process may slightly vary.

Check the “Synchronisation” window in the temperature logger

software. The eld is to display the value ‘USB@x’ and the version

number.

When the installation is complete, click on ‘Finish’.

Once the driver has been installed, you can start the application.

You can start the program via the start menu:

Start->All Programs->Temperature-Logger.

On the left side a (still empty) sensor list is displayed. On the right side is a

space for a graphic display of the measured temperature curves. On the left

bottom side of the screen a status bar displays the message ‘Ready’.

Use the Help function for more information about the loggersoftware.