Instructions

41
1b. MULTILOGGER INFORMATION
QUICK START
1.1 Starting up
-Pleasereadthismanualrst.
- Connect the power adapter and switch on the BS1500
- The power-on indicator will light up.
- When sensors are active, the receive LED will blink.
- Connect the BS1500 receiver to the computer (via USB).
- Start the ‘BS1500 Conguration Tool’ to set up the device. It can be
found in the tools-menu of the temperature logger software.
The latest software is available at
http://www.arexx.com/templogger
1.2 The BS1500GPRS and GPS transceiver
- The BS1500 receives the measurements from the sensors wirelessly.
- The temperature sensors transmit their data to the BS1500.
- Many sensors (about 30) can be connected to the system at the same time.
- Separate sensors for the Temperature Logger are available at your dealer.
- We have connected 30 sensors to one single receiver without any problems.
- The BS1500 shows the sensor measurements in de Logger Software when
connected with USB.
-Therangeofthesensorscanvaryasaresultofenvironmentalinuences.
Depending on the material properties of the surrounding areas, sensors
located inside refrigerator systems may not always be able to communicate
with the receiver.
Depending on the material properties of the surrounding areas, sensors located
inside refrigerator systems may not be able to communicate with the receiver.
The latest software, documentation and manuals see:
http://www.arexx.com/templogger
BS1500 CongurationTool
E
N
G
L
I
S
H