Product specifications
- 7 -
2.2. Getting Started
The BS-1200 comes with an adapter and USB cable. The adapter connects
to the back 5V/±500mA. The USB cable can be used to connect to the
BS-1200 directly to a PC, then BS-1200 will operates exactly the same as a
BS510 receiver.
You can also use the USB cable to ash the new rmware for a new soft-
ware update.
3. First network connection
This paragraph describes how to connect the BS-1200 to your local Wi
network. For this we need the networkcong tool which can be found in the
tools menu of the logger software (be sure you have the latest version).
2.1. General settings
The BS1200 factory setting for Wi is:
security: none
ssid: ssid
Normally, you won’t have these settings, so we have to adjust the BS1200
to match your local Wi settings. The settings can be set with the network-
cong tool; you can start it from the ‘tools’ menu of the temperature logger
software.
In short, you scan for a network, select it and set its passphrase. After
pressing the write button a connection will made by the BS1200.
Connect the BS1200 via usb to a pc with the latest temperature logger soft-
ware. Start the networkcong tool; the following dialog will be displayed:
It shows empty network settings.
When you press the read button, you obtain
the current status of the bs1200.
You will nd the bs1200 is trying to connect
(to the ‘ssid’ network), but a timeout is
given since the attempt fails.
Fig.3. Networkcong tool