Product specifications
- 10 -
4. BS-1200 WEBSERVER
The obtained ipaddress and network name with the Networkcongtool can
be used to get access to the BS1200 webserver.
Normally, you can use the networkname in the url eld of your browser to
access the BS1200. (Please prepend ‘http://’ before the networkname). If
that is not working, the BS1200 should also be accessible by its ip address.
The embedded Web server contains several pages with recent data. There is
an administrative section available for various settings.
The BS1200 web server can be found at the address given by the network
name. Make sure that any rewall and/or browser blockades are removed
which are applicable to the BS1200.
The webbrowser start page shows for each sensor the most recent measu-
rement (Fig.7). The value presented is the latest sensor measurement. The
time display is formatted according to the default settings on the computer.
The RSSI column gives an indication of the strength of the received radio
signal.
Fig.7. Webbrowser