Product specifications

AREXX Engineering & JM3 Engineering
Version: 1.05 Nov. 9
th
, 2014 page: 6
Manual
1. Connecting to RP6 or ASURO xTend Board
The module will be simply plugged in to the K3 connector on the ASURO xTend board. There is a
voltage regulator on the module so it can be directly plugged into the I2C Module header on the
RP6 Sensor board. In the RP6 case, you have to solder contacts on the boards (Precision
Contacts RM 2,54 Conrad Part number 741333 – 05).
1.1. PIN OUT Barometer Humidity Temp Module (Asuro Connector)
PIN 1 = VDD_3.3
PIN 2 = n/c
PIN 3 = n/c
PIN 4 = n/c
PIN 5 = n/c
PIN 6 = n/c
PIN 7 = SCA
PIN 8 = SCL
PIN 9 = n/c
PIN 10 = GND
PIN1 Pin10
1.2. PIN OUT Barometer Humidity Temp Module (RP6 Connector)
PIN 1 = VDD_3.3
PIN 2 = SCL
PIN 3 = SCA
PIN 4 = n/c
PIN 5 = n/c
PIN 6 = n/c
PIN 7 = n/c
PIN 8 = n/c
PIN 9 = GND
PIN1 PIN2 Pin9