Instructions
- 4 -
Symbols
This manual provides the following symbols:
The “Attention!” Symbol is used to mark important details.
Neglecting these precautions may damage or destroy the ro
-
bot and/or additional components and additionally you may
risk your own health or the health of other persons!
The “Information” Symbol is used to mark useful tips and
tricks or background information. In this case the informa
-
tion is to be considered as “useful, but not necessary”.
Safety recommendations
- Check the polarity of the batteries or power supply.
- Keep all products dry, when the product gets wet remove the batteries or power directly.
- Remove the batteries or power when you are not using the product for a longer period.
- Before taking the module into operation, always check it and its cables for damage.
- If you have reason to believe that the device can no longer be operated safely,
disconnect it immediately and make sure it is not unintentionally operated.
- Consult an expert if you are unsure as to the function, safety or connection of the module.
- Do not operate the module in rooms or under unfavourable conditions.
- Do not overload the servo’s
- This module is equipped with highly sensitive components. Electronic components are
very sensitive to static electricity discharge. Only touch the module by the edges and avoid
direct contact with the components on the circuit board.
Normal use
This product was developed as an experimental platform for all persons which are interested
in robotics. Main goal is to learn how you can program the device in C-langue. This product
is not a toy; it is not suitable for children under 14 years of age!
This robot arm is also not an industrial robot arm, with industrial specications and
preformance!
It may only be used indoors. The product must not get damp or wet. Also be carful with
condence when you take it from a cold to an warm room give it time to adapt on the new
coditions before you use it.
Any use other than that described above can lead to damage to the product and may
involve additional risks such as short circuits, re, electrical shock etc.
Please read all the safety instructions of this manual.