Instructions

- 3 -
Impressum
©2007 AREXX Engineering
Nervistraat 16
8013 RS Zwolle
The Netherlands
Tel.: [phone]
Fax.: [phone]
E-Mail: [e-mail]
This manual is protected by the laws of Copyright. It is
forbidden to copy all or part of the contents without prior
written authorization!
Product specications and delivery contents are subject to
changes. The manual is subject to changes without prior
notice.
You can nd free updates of this manual on
http://www.arexx.com/
“Robot Arm PRO und -Hobby” are registered trademarks from AREXX Engineering.
All other trademark are the property of their owners. We are not responsible for the
contents of external web pages that are mentioned in this manual!
Information about limited warranty and responsibility
The warranty granted by AREXX Engineering is limited to the replacement or repair of the
Robot Arm and its accessories within the legal warranty period if the default has arisen from
production errors such as mechanical damage or missing or wrong assembly of electronic
components except for all components that are connected via plugs/sockets.
The warranty does not apply directly or indirectly to damages due to the use of the robot.
This excludes claims that fall under the legal prescription of product responsibility.
The warranty does not apply in case of irreversible changes (such as soldering of other
components, drilling of holes, etc.) of the Robot Arm or its accessories or if the Robot Arm
is damaged due to the disrespect of this manual!
The warranty is not applicable in case of disrespect of this manual! In addition, AREXX
Engineering is not responsible for damages of all kinds resulting from the disrespect of this
manual! Please adhere above all to the „Safety recommendations“ in the Robot Arm
manual.
Please note the relevant license agreements on the CD-ROM!
IMPORTANT
Prior to using this robot arm for the rst time, please read this manua thoroughly up to the
end! They explain the correct use and inform you about potential dangers! Moreover they
contain important information that might not be obvious for all users.
Important safety recommendation
This module is equipped with highly sensitive components. Electronic components are
very sensitive to static electricity discharge. Only touch the module by the edges and avoid
direct contact with the components on the circuit board. Please do never overload the servo’s