Instructions

- 13 -
Mounting the dual servo:
1x Dual servo holder
2x Disc with axis
2x Round-head screw M3 x 8
2x O-Ring M3
2x Locknut M3
4x Selftapping screw 2.6x6
1x Cover
3x Selftapping screw 2.3x8
2x Servo disc
2x Servo screw small M2x6
2x Servo DGServo 12g
For the final assembly of the dual servo, following parts are required:
Miniservo DGServo 12g
Selftapping screw
2.6x6
Cover for dual servo
holder
Locknut M3
Disc with
axis
Dual servo holder
Round-head screw
M3 x 8
Servo disc
Selftapping screw
2.3x8
Dual servo holder
with servos
Dual servo holder
with servos
Servo screw
M2x6
Mount the dual servo exactly and in
the same order as described in the
drawing!
O-Ring M3