Instructions

- 10 -
Locknut
Mounting the bottom servo:
Following parts are required:
1x Bottom part
1x Maxi-servo holder
4x Servo screw small M2x6
Mount the servo axis on the servo. Please refer to the detailed drawing!
Selftapping screw
M2x6
Disc with
axis
Round-head screw M3x8
Maxi-servo holder
Bottom plate
Mount the servo holder on the
servo arm, please look at the
detailed drawing!
Mounting the servo holder:
Following parts are required:
1x Bottom plate with servo
holder
1x Disc with axis
1x Round-head screw M3x8
1x Locknut M3
Servo holder
Bottom plate