Data Sheet

Mechanical and electrical characteristics3
Mechanical characteristics3.1
Table 3: Mechanical characteristics @ Vdd = 3 V, T = 25 °C unless otherwise noted
UnitMax.Typ.
(1)
Min.Test
condition
ParameterSymbol
dps±300Measurement
range
FS
mV/dps3.752Sensitivity
(2)
So
%/°C0.01Delta from
25°C
Sensitivity
change vs.
temperature
SoDr
V1.5Zero-rate
level
(3)
Voff
dps/°C0.02Delta from
25°C
Zero-rate
level change
vs.
temperature
OffDr
% FS±1Best fit
straight line
Non linearityNL
Hz140Bandwidth
(3)
BW
mV400
(4)
Self-test
output
change
Vst
dps / √Hz0.014Rate noise
density
Rn
°C85-40Operating
temperature
range
Top
(1)
Typical specifications are not guaranteed.
(2)
Sensitivity and zero-rate level are not ratiometric to supply voltage.
(3)
The product is capable of measuring angular rates extending from DC to the selected BW.
(4)
Self test typical absolute value.
Note:
The product is factory calibrated at 3 V. The operational power supply range is specified in
the Electrical characteristics table.
7/16DocID16568 Rev 2
Mechanical and electrical characteristicsLY330ALH