User manual

- 16 -
Fig. 4a Program Blink Fig. 4b Select Board
At this stage we will have to select the correct Arduino-board at the
menu-entryTools>Board> Arduino Duemilanove or Nano w/Atme-
ga328 (see g. 4b)
4.5.3 Select Compoort
The next step denes the correct COM-port for the Arduino-interface.
The correct COM-interface (or COM-port) for the robot is COM 12.
In order to select the COM-interface please open the menu-entry:
Tools>Serial Port>COM 12.
(see g. 5)
Fig. 5 Selecting the correct
Com-Port