Users Manual

7 of 9
5. 10-Degree Adding Base
There is an additional base to add 10 degree more tilt angle for the mouse. You
may select a more comfortable hand position, by using or not to use the base.
Trouble Shooting
1. Make sure you have put the batteries in correction directions, and power switch is
ON.
2. Make sure you have connected the receiver correctly to the computer's USB port.
3. Try another USB port, in case that your USB port is loose.
4. Replace new batteries if needed when the battery power is low.
5. If mouse performance is slow or intermittent around a wireless network, unplug
the Nano receiver from the USB port and then re-insert it. To reactivate the mouse,
switch it on, off and on again using the On/Off switch on the bottom of the mouse.
6. Repeat the connection procedure. You can also try moving the mouse closer to
the Nano receiver.
7. For the best performance, we suggest that you place the receiver away from other
electrical devices.
(ǃ) Note:
 The mouse, while working if encountering any interference, will
automatically source out with the receiver and transfer to another free
channel. During the transferring, the cursor movement may have a second
delay.
(ǃ) Note:
 The Red LED on the mouse top is the low battery power indicator. Its 6-
seconds flashing indicates that the batteries inside the mouse are needed
to be replaced.