User's Manual

Receiver Charging cable (optional)
ID reset button / Led
1. Insert the batteries
a. Remove the battery compartment cover on the top case of the mouse by pressing the
arrow sign on bottom of scroll bar.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartments cover properly.
Wheel button/
Battery cover button
ID reset button
Mouse
Low power Led /
Charging Led
Introduction
Congratulations on your purchase of the most innovative wireless mini mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
A. Hardware Installation
27 MHz RF (distance 1.0m)
Using state-of-art technology. High tracking speed and sensitivity.
Longer battery life -- 6 months. (*Optional for specific laser long-life models)
One Channel/256 ID
Recharging by USB charging cable (optional)
Plug and Play! No need to set the channel ID.
Power on/off switch
2*AAA NiMH batteries (for charging models) or Alkaline batteries (for non-charging
models) included
1600 dpi (laser) or 800 dpi (optical)
Power on/off
switch
This product complies with IEC 60825-1, Class I laser product. (for Laser mouse
models only.)
Your product complies with FCC and CE rules.
Safety Notice
Please DO NOT direct the
laser beam at anyone's eyes.
(※ Only for laser model)
Features
+
-
Move backward
A wrong battery placement
may cause batteries overheat.
1
2
2 AAA batteries
Press the
battery cover button
Battery compartment cover
It is a MUST to fully charge the rechargeable batteries contained in this package at the first-time use. (for
charging models)
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
Power on/off switch is designed to save the batteries power while non-usage of a longer period.
2. Connect the receiver
a. Turn off your PC.
b. Connect the receiver to USB port on PC
c. Turn on your PC
PC
USB port