User's Manual

Charging Cradle / Recevier
ID reset button
Led
Wheel button
Battery cover
ID reset button
Forward button
Backward button
Mouse
Battery status indicator
Resolution
switchable button
Introduction
Congratulations on your purchase of the most innovative wireless mouse. With an incredible
sensitivity to surface details and high tracking speed than other mice, the mouse can track
reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will
make you more productive and more comfortable.
27 MHz RF (distance 1.0m)
Using state-of-art technology. High tracking speed and sensitivity.
4D tilt wheel scroll. (optional)
One Channel/256 ID
Recharging by charging cradle
Plug and Play! No need to set the channel ID.
Power on/off switch
Data report rate : 125 Report/Sec.
2*AAA NiMH batteries
800 dpi or higher
Power on/off switch
This product complies with IEC 60825-1, Class I laser product. (for Laser mouse
models only.)
Your product complies with FCC and CE rules.
Safety Notice
Please DO NOT direct the
laser beam at anyone's eye.
(※ Only for laser model)
Features
1. Insert the batteries
a. Remove the battery compartment cover on the bottom case
of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in
the battery cabinet.
c. Close the battery compartments cover properly.
A. Hardware Installation
A wrong battery placement
may cause batteries overheat.
Battery compartment cover
2*AA charging batteries
It is a MUST to fully charge the rechargeable batteries contained in this package at the first-time use.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.