AZSQ3300 Ares XView Manual

Using the Optional Ares VR Headset

For a complete, immersive, FPV experience you can clip your smartphone into

the optional Ares VR FPV Headset (AZSQ3312). When using the headset note

that you’ll need to select the Split Screen icon in the ‘Settings’ menu of the

WiFi_UFO App.

WARNING: When ying FPV using the WiFi_UFO App, be aware that incoming

phone calls, text messages and other alerts will temporarily interrupt your

camera view.

Gyro Calibration

If at any point you wish to recalibrate your XView’s gyros to re-establish stable

ight and correct any control malfunction – following a crash, for example –

you can do this in the following way:

1. Prepare your Recon FPV for ight and arm the motors.

2. Position the quadcopter directly in front of you with the camera facing

forward.

3. Pull both transmitter sticks as far back as they will go then place the left-

hand stick in the bottom right-hand corner of the gimbal and the right-

hand transmitter stick in the bottom left-hand corner of the gimbal.

4. After a short pause the XView’s LED lights will ash to conrm that re-

calibration is in process. Hold the sticks in position until the lights stop

ashing. Successful recalibration will now have taken place.