User Manual

QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
5
With the model in front of you,
facing away, move the aileron
rudder stick to the left and check
that the rudder moves left in
response. Right aileron stick will
move the rudder to the right.
6
Pull the elevator stick back and
check that the elevator moves in an
upward direction. Push the elevator
stick forward and check that the
elevator moves in a downward
direction.
7
With the propeller clear of
obstructions and the model
restrained, open the throttle
slowly and check that it turns in
an anticlockwise direction when
viewed from the front.
8
Check that the elevator and
rudder are centered and adjust as
necessary using the trim buttons
or the subtrim function on your
computer radio.
9
Your SPAD is now ready to y.
Choose a at-calm day for the rst
ight or use a suitable indoor venue
(a sports hall is ideal) that’s free
of obstructions. Note that it’s not
necessary to y the SPAD at full
throttle, indeed scale ight and
extended duration are possible at
much lower throttle settings. We
hope you have many enjoyable ights with with your model.
Mode 2 Transmitter Shown
Mode 2 Transmitter Shown