User Manual

QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
12
Check that the elevator and
rudder are centered and adjust as
necessary using the transmitter’s
trim buttons.
13
Your SPAD S.XIII is now ready to y. Choose
a at-calm day for the rst ight or use
a suitable indoor venue (a sports hall is
ideal) that’s free of obstructions. Note that
it’s not necessary to y the SPAD at full
throttle, indeed scale ight and extended
duration are performed at much lower
throttle settings. We hope you have many
enjoyable ights with with your model.
Transmitter Pairing
Having followed Steps 1 to 8, in the unlikely event that your SPAD does not operate please
follow the 3 stage pairing process detailed here:
1
Switch the transmitter ON and
connect the ight battery as
detailed in Step 7.
2
Simultaneously press the
two throttle trim buttons. The
transmitter will emit a series of
beeps/tones indicating that it has
entered pairing mode. Release
the buttons.
3
The pairing process is complete
when the servos (and the rudder/
elevator) move back and forth
briey and the transmitter stops
emitting the beeps/tones. You
should now have full control of
the airplane. Return to Step 9 to
complete the set-up of your model.