AZSA1500 Ares Sopwith Pup RTF Quick Start Guide

QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
11
Pull the elevator stick back and
check that the elevator moves in an
upward direction. Push the elevator
stick forward and check that the
elevator moves in a downward
direction.
12
With the propeller clear of
obstructions and the model
restrained, open the throttle
slowly and check that it turns in
an anticlockwise direction, when
viewed from the front.
13
Check that the elevator and
rudder are centered and adjust as
necessary using the transmitter’s
trim buttons.
With the model in front of you,
facing away, move the rudder stick
to the right and check that the
rudder moves right in response.
Left rudder stick will move the
rudder to the left.
10
Check the control surfaces, as below, noting that instructions for servo reversing are
available in the full online instruction manual at www.ares-rc.com. On this 3 channel
airplane the rudder function is controlled by the aileron stick on the transmitter.