User Manual
14
GAMMA PRO V2 REPLACEMENT PARTS
Item Number Description
AZSA1615 Fuselage w/o decal: Gamma V2, Gamma Pro V2
AZSA1616 Main Landing Gear: Gamma V2, Gamma Pro V2
AZSA1617 Landing Gear Mount/Battery Hatch Set: Gamma 370 V2, Pro V2
AZSA1618 Tail Wheel Set: Gamma V2, Pro V2
AZSA1621 Painted Cowl: Gamma V2, Gamma Pro V2
AZSA1623P Spinner: Gamma Pro V2
AZSA1624P Decal Set: Gamma Pro V2
AZSA1626 Aileron Wing Set: Gamma V2, Pro V2
AZSA1629 1250KV, 370 Brushless Motor: Gamma Pro V2
AZSA1629S Prop Shaft Adapter w/ nut: Gamma Pro V2
AZSA1630 Aegis NFP Control Board: Gamma Pro V2
AZSA1640 Float Set: Gamma V2, Pro V2
AZSAP8040HS 8 x 4 High Speed Propeller (2): Gamma Pro, Pro V2
KNNA1001 KA-6 6-Channel Radio System: NFP version
KNNA1001M1 KA-6 6-Channel Radio System: NFP version: Mode 1
KNNA1003 KA-6 6-Channel Transmitter Only: NFP version
KNNA1003M1 KA-6 6-Channel Transmitter Only: NFP version: Mode 1
KNNA1004 AR-6 6-Channel Aircraft Receiver
AZS1207 9-Gram Sub-Micro Servo: Gamma 370, Pro, Gamma V2, Pro V2
AZS1207GS 9-Gram Sub-Micro Servo Gear Set: Gamma 370, Pro, Gamma V2, Pro V2
AZS1214 Tail Set w/o decal: Gamma 370, Pro, V2, Pro V2
AZS1218 Tail Wheel Set: Gamma 370, Gamma Pro
AZS1219 Pushrod Set: Gamma 370, Pro, V2, Pro V2
AZS1220 Control Horn Set: Gamma 370, Pro, V2, V2 Pro
AZS1225 Rubber Bands: Gamma, V2, Gamma Pro, Pro V2
AZS1230 20-Amp Brushless Motor ESC w/T-connecter: Gamma 370 Pro, Pro V2
AZSB10003S20D 1000mAh 3-Cell/3S 11.1V 20C LiPo Battery, T-connector: Gamma Pro, Pro V2
AZSC308C 308C 3-Cell/3S 11.1V LiPo, 0.8A DC Balancing Charger: Gamma Pro V2
AZSC1308PS 100-120V AC to 13V DC Adapter, 0.8-Amp Power Supply: Gamma Pro V2
Ares Gamma Pro V2 Complete Item List
Beginner Mode: when switched into this mode the NFP software will restrict the bank angle of the
wings while mixing in rudder to coordinate the turns. This mode is great for take off and landing as it
helps maintain a smooth and straight ight path.
Intermediate Mode: when switched into this mode the NFP software will allow greater bank angles
during ight but does not mix in any rudder. This allows the pilot to learn how to add rudder on his own
to coordinate turns. As in beginner mode, releasing the sticks will immediately return the airplane to
level ight.
Auto Roll Function: Your Gamma Pro V2 incorporates a unique auto roll function. When ying in
either one of the NFP modes you can roll 180° to stabilized inverted ight by pressing and holding
the NFP button and deecting the aileron stick in either direction and returning it to neutral and then
releasing the NFP button. The Gamma Pro V2 will roll in the direction desired and stop inverted. The
NFP stabilization will still be in effect. You may need to add a little down elevator to hold the nose up.
This will help you get familiar with inverted ying while greatly reducing some of the work load. To
return to upright simply repeat the steps of pushing and holding the NFP button and moving the aileron
stick in either direction and back to neutral and then releasing the NFP button. If you press and hold
the NFP button and hold the aileron stick at either the left or right extreme and your Gamma Pro V2
will perform a series of rolls across the sky. Release the NFP button to again stabilize in either upright
or invertes ight.
Many aerobatic maneuvers can be performed with the NFP turned off but remember that if you get in
trouble, just switch on one of the NFP modes to immediately recover to level stabilized ight. We hope
that you enjoy learning to y the Gamma Pro V2 and have many enjoyable ights.