User Manual

QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.com
27
Open the battery hatch, unplug the Li-Po battery and switch OFF the
transmitter. Assemble the propeller and spinner in the following sequence:
b
c
Fit the propeller over the shaft
and seat it comfortably against
the upstands of the backplate.
Add the spinner backplate.
Drop the circular propeller driver
over the propeller shaft, noting its
orientation.
a
d
Add the washer then loosely t the
prop nut.
26 26
Open the throttle slowly and
check that the motor shaft turns
in an anticlockwise direction
(when viewed from the front).
Open the throttle slowly and
check that the motor shaft turns
in an anticlockwise direction
(when viewed from the front).
Mode 2 Mode 1