Instruction manual
Installing Transmitter Batteries
Install the six included AA baeries in the back of the transmier by removing the screw securing the
baery compartment cover/door then remove the baery compartment cover/door. Ensure proper
polarity of the baeries before installing them as indicated by the markings molded into the baery
compartment, then re-install the compartment cover/door and screw.
Check for proper operaon of the transmier by switching the power switch ON (slide it upward). The
LED indicator near the top right-hand corner should glow solid red while the LCD screen powers on to
display various data. These indicaons confirm the transmier is powered on and funconing correctly.
NOTE: The transmier is equipped with a low voltage baery alarm. If at any me the audible alarm is
on it will be necessary to replace the AA baeries with new ones.
Transmitter Details
The Chronos FP 110 includes an M4LPH Micro 4-Channel Helicopter Transmier equipped with 2.4GHz
technology, dual rates, digital trims and an LCD screen.
9