Instruction manual
Required to Complete
The Chronos FP 110 RTF includes everything needed to fly right out of the box. There’s nothing extra to
buy or provide!
Before the First Flight Checklist
PLEASE NOTE: This checklist is NOT intended to replace the content included in this instrucon
manual. Although it can be used as a quick start guide, we strongly suggest reading through this
manual completely before proceeding.
• Remove and inspect all contents
• Plug the AC charger into a suitable outlet/power source
• Begin charging the LiPo flight baery (connect it to the charger)
• Install the six (6) AA baeries in the transmier
• Install the LiPo flight baery in the helicopter (aer it’s been fully charged) and connect it
to the control unit
• Test the controls to confirm proper operaon
• Familiarize yourself with the controls
• Find a suitable area for flying
Flight Checklist
PLEASE NOTE: This checklist is NOT intended to replace the content included in this instrucon
manual. Although it can be used as a quick start guide, we strongly suggest reading through this
manual completely before proceeding.
• Always turn the transmier on first
• Connect the LiPo flight baery to the control unit
• Allow the control unit to inialize and arm properly
• Fly the model (take-off from a flat/level surface)
• Land the model (land on a flat/level surface)
• Disconnect the LiPo flight baery from the control unit
• Always turn the transmier off last
5