Instruction manual
Moving the right-hand sck to the le will roll the helicopter to the le, allowing it to be flown to the le.
This is accomplished by having the aileron (le-hand) servo pull the swashplate downward.
Moving the right-hand sck to the right will roll the helicopter to the right, allowing it to be flown to the
right. This is accomplished by having the aileron (le-hand) servo push the swashplate upward.
The aileron trim lever (located immediately below the right-hand sck) can be used to help keep the
helicopter from driing le or right when hovering and with no right-hand sck/aileron control input. For
example, if the helicopter dris to the right when hovering add le aileron trim by pressing the lever to
the le unl the helicopter hovers as level as possible without driing to the right.
17