Instruction manual

Flight Controls and Trimming
In the event you are not familiar with the controls of the Chronos FP 110 please take the me to
familiarize yourself with them as follows and before proceeding with your first flight:
The le-hand sck on the transmier controls both the throle (climb/descend) and rudder (yaw
le/right) channels. When the le-hand sck (also known as the ‘throle’ sck) is in the lowest possible
posion the rotor blades will not spin. Moving the sck upward will increase the speed/RPMs of the rotor
blades. Increasing the speed/RPMs of the rotor blades will cause the model to climb.
Decreasing the speed/RPMs of the rotor blades by lowering the le-hand sck will cause the model to
descend.
Aer liing the helicopter off the ground you can maintain altude in ‘hover’ by carefully moving the
le-hand sck up and down slightly as needed so the helicopter will not climb or descend.
12