User Manual

Table Of Contents





OPERATOR'S MANUAL

STORE THIS MANUAL IN A SAFE PCE FOR FUTURE REFERENCE

Get to Know Your Double

Flaring Tool

       

    



















 

 

 

 

 

 



PAGE 1
PROFESSIONAL BRAKE llNE FlARING TOOl OPERATOR'S MANUAL Get to Know Your Double Flaring Tool The ARES Professional Brake Line Flaring Tool features 4 dies for tubing between 3/16" and 3/8" and a convenient storage case so you'll have everything you need for flaring jobs in one place. With a T-handle screw clamp that keeps the selected die and tubing securely in place when used in con junction with a vise, this tool is designed to create 45-degree double, bubble, and single flares quickly and easily.
PAGE 2
Preparing Tube for Flaring: Read these instructions carefully before using this Professional Brake Line Flaring Tool. 1.Use a suitable tubing cutter to square cut the tube end. 2.Chamfer the outside and ream the inside of the tube, making sure to remove burrs and clear metal chips from the inside of the tubing. Clean the outside of tubing. 3.Lightly lubricate the end of the cut tubing with Anti-Seize Compound. 4.Place the appropriate fittings over ends of the tubing, with the flare end facing outward.
PAGE 3
PAGE 4
PAGE 5