User manual Crossfire
4
Introduction
The Ares Z-line Crossre Racing Quad is a high-performance quad that’s
ideal for getting started in 250 class racing. The Crossre provides natural
ight characteristics designed and tuned for FPV racing through a custom
ight controller that’s preloaded with the latest Cleanight software and
supports future updates via a micro USB port. The 32bit ight controller is
also customizable with multiple ight modes, including Acro (3-axis) and Self-
Leveling (6-axis) mode. Powerful and efcient brushless race motors provide
the Crossre’s speed and are complemented by 12amp ESCs with ONE-SHOT
enabled software.
A unique low-prole design and streamlined body combine to give the
Crossre improved aerodynamics and protection for the electronics against
the elements. The airframe is made from high-quality 3k twill weave matte
carbon ber for strength and lightweight performance. The Crossre comes
with a choice of two pre-painted, race-inspired stock canopies (red and blue)
with two alternate choices (green and orange) offered separately, allowing
you to race in your choice of colors. To top off the attractive design, bright
red LED tail lights help with visibility and make sure your competitors know
who’s in front of them on the course. As for a video system, the Crossre
comes with a pre-installed ultra-micro 25mW, 32-channel, 4-band VTX (video
transmitter) and a 640 x 480 camera with 120 degree FOV (eld-of-view) that
combine to provide a crisp FPV experience. The VTX is compatible with your
favorite goggles or a quality 5.8GHz video receiver / monitor, like the newly
released Ares Z-line monitors.
Perhaps best of all, the Ares Z-line Crossre arrives fully assembled out of the
box and includes pretty much all the components you need to race – even a
3S 2200mAh battery that’s easily removed without taking off the canopy. All
you need to add is your own standard-size (end pin) or satellite receiver and
you’ll be heading out to race your new Crossre before you know it.
Contents
1 x Factory assembled Crossre racer quad.
1 x 3S 11.1V 2200mAh LiPo battery.
1 x USB to micro USB cable.
4 x 6 x 4.5” (CW & CCW) propellers.
1 x Cloverleaf antenna.
1 x 8mm wrench for cloverleaf antenna.
1 x 1.5mm L-shape hex drive.
1 x Quick-start guide.