User manual Crossfire

36. Propeller installation. Install the propellers using a 1.5mm L-shape

hex drive. Apply adequate, but not excessive, force to securely tighten

the nuts. Note that the black nuts have a left-hand thread and tighten

counter-clockwise. Your Crossre is now ready to y.

VTX Channel Selection

The video transmitter’s 32 channels are made available via the DIP switches

on the top of the unit. The arrangement of the ve switches provides a new

channel to which your Ares FPV monitor or your FPV goggles will auto-tune.

Select the channel you require using the tables below noting that DIP switch

1, 2 and 3 are used to change between CH1 and CH8 whilst DIP switch 4 and

5 are used to select the frequency (FR).