User manual Crossfire

• Current Sensor – No adjustment required.

• System conguration – Set as noted below:

▪ 3500 – Flight Controller Loop Time

▪ 286 – Cycles/Sec (Hz)

• Other Features – For US versions of the Crossre that feature 6 motor

output connectors on the right-hand side of the Flight Control Board,

set SERVO_TILT to ON. For Flight Control Boards with 7 motor output

connectors on the right-hand side of the Flight Control Board, set SERVO_

TILT to OFF.

• Save and Reboot – At the end of this section click the ‘Save and Reboot’

icon in the bottom right-hand corner of the screen.