User manual Crossfire

11
9. Open the Cleanight Congurator software. Click the CF icon to access the
Cleanight Congurator ‘Welcome’ page.
10. Connect your Crossre. Ensure all propellers are removed, switch your
transmitter on, then connect the small end of the supplied USB cable to
the micro USB socket the Crossre’s Flight Control Board and the large end
to a spare USB socket on your computer. When the cable is connected the
Cleanight ‘Setup’ window will automatically be displayed.
Note: Apple Mac OS X users may experience problems which require that
a specic driver be installed to operate the Cleanight software. If you are
experiencing problems you can download the required driver from http://
www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx