User manual Crossfire

7. Antenna installation. Install the cloverleaf downlink antenna using the

8mm wrench.

WARNING! The Crossre should NEVER be powered ON

without the antenna connected as this can damage the video transmitter

circuitry.

8. Download the Cleanight Congurator software. Before ying your

Crossre you’ll need to congure and tune the Flight Control Board using

Cleanight open-source software. This software can be sourced via

Google Chrome using the following method:

a. Open Google Chrome.

b. Enter ‘Apps’ by clicking the Apps icon in top left corner of your menu bar.

c. Click on the ‘Web Store’ icon.

d. Enter ‘Cleanight’ into the search box (top left corner).

e. Click the + TO CHROME icon to download the ‘Cleanight Congurator’ software.

f. When the software has been successfully downloaded the green CF icon will

appear in the Apps menu.

Important note: Due to the nature of open-source software the Cleanight

Congurator interface is susceptible to regular updates and may not mirror the

screen images provided in the step-by-step set-up stages detailed below.