Crossfire Quick Start Guide

BINDING/PAIRING GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.comFull manual available to download from: www.Ares-RC.com
9
Before ying your Crossre you’ll need to congure and tune the on-board
ight controller using Cleanight open-source software. This software can be
sourced via Google Chrome using the following method:
1. Open Google Chrome
2. Enter ‘Apps’ (icon in top left corner)
3. Enter ‘Web Store’
4. Enter ‘Cleanight’ into the search box
5. Download ‘Cleanight Congurator’ software
10
Connect the Crossre’s ight
control board to your computer
via the board’s micro USB socket
and use the Cleanight software
to congure your quad. Use the
Cleanight Documentation &
Support section for guidance.
11
Disconnect the quad from your
computer, insert the fully charged
3s 2200mAh Li-Po and secure it
with the hook and loop strap. As
the LiPo is installed from under the
Crossre, the body does not need
to be removed.