Installation manual

Arecont Vision MegaBall™ Installation Manual
5 | Page
12. To adjust the camera tilt, pan or z-axis (yaw),
loosen the 3 set screws on the in-ceiling
mount as shown in Image 6. Then adjust as
necessary and retighten the 3 set screws.
Adjusting the Tilt, Pan, Z-Axis (Yaw):
Image 6
NOTE : The 3 axis in-ceiling camera allows
360° camera body rotation, 90° tilt, and 360°
camera sleeve rotation for easy installation in
any location as shown in Image 7.
Image 7
13. For the vari-focal model, adjust focus, iris and
field of view using the provided Security L-Key
(Image 1F) as shown in Image 8.
Adjusting the Focus, Iris and Field of View:
Image 8
14. For the fixed-focal model, adjust the focus by
loosening the two set screws on the front shell
as shown in Image 9 using the supplied
double sided hex key (Image 1G).
Image 9 Image 10
15. Adjust the lens adapter to focus the camera
as shown in Image 10. Retighten the set
screws once focusing is complete.
Iris
Focus
Tilt 90
°
Set Screw
Zoom
Camera Body
Rotate 360
°
Camera Sleeve
Rotate 360
°