Installation manual

Arecont Vision MegaBall™ Installation Manual
3 | Page
MegaBall™ Dome Version (-D) Installation Manual
A. Arecont Vision MegaBall™ camera with in-
ceiling mount (indoor use only)
Inside the box:
B. Surface mount (preassembled on dome)
C. O-ring (preassembled on bezel)
D. Dome cover (Bubble)
E. CD with AV100 software and user
manuals (license key required for
recording)
F. Security L-Key
G. One double-sided hex key (fixed focal lens
version only)
H. Pack of three (3) wood screws and three
(3) dry wall anchors
J. Mounting template
• #1 Phillips head screwdriver
Not included but needed:
Image 1
Mounting the Camera:
1. Remove the camera and hardware from the
box.
2. Using the mounting template, prepare the
mounting surface for camera installation
3. Plug Ethernet cable into the MegaBall™ PoE
female RJ45 connector. (Image 2)
NOTE: If the camera will be powered via PoE,
please skip to step 5.
Image 2
4. If the camera will be powered by an AC or DC
power supply, connect external power with
pigtail cable connector.
NOTE 1: Ensure that the polarity of the DC
input on the camera matches the way that the
wires are installed in the connector shown in
Image 2.
NOTE 2: AC power does not have polarity.
G
F
E
C A D B
H
J
Digital In
Digital Out
Auxiliary Power
PoE RJ45