Installation Manual

Microdome Duo® Installation Manual
Page | 3 [e-mail]
+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | [e-mail]
CAUTION!
1. Do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.
2. Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all
local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire
suitable for the application.
3. Always use hardware e.g. screws, anchors, bolts, locking nuts etc. which are compatible with mounting
surface and of sufficient length and construction to insure a secure mount.
Package Content
This equipment should be unpacked and handled with care. The original packaging is the safest container in
which to transport the unit and can be used if returning the unit for service. The packaging contains:
 One (1) Arecont Vision Camera with Mounting Adapter Plate installed.
 One (1) Drop Ceiling Mount Plate Adapter
 One (1) I/O Cable
 One (1) M-F CAT-5E Network Patch Cable with grommet (installed)
 Blind Grommet
 Standard Grommet
 Grommet Insertion Tool
 One (1) Security L-key
 One (1) CD with Manual and Software
 One (1) Mounting Template (Drop Ceiling/Surface Mount)
 Four (4) Mounting Screws (#6x1” for wood or sheet metal)
 Four (4) Mounting Dry Wall Anchors
 Four (4) Ceiling Mount Mounting Screws #6-32 PPH UNC 1.0” LG.
 Four (4) Box Mount Mounting Screws #8-32 UNC PTH 0.5” LG. (Low profile head)
 One (1) Flat-head screwdriver
 One (1) Philips head screwdriver