Installation Manual

Arecont Vision H.264 Day/Night SurroundVideo
®
Series Installation Manual
14 | Page
H.264 Day/Night SurroundVideo
®
Electrical Box Adapter Installation Instructions
Inside the box:
A. Electrical Box Adapter
B. Pack of four (4) machine screws
Not included but needed:
 #2 Phillips head screw driver
 Common Electrical Box, such as single
gang box, double gang box, or square
electrical boxes shown in Image 42-1~4.
Image 41
NOTE: H.264 Day/Night SurroundVideo®
and MegaView™ share same Electrical Box
Adapter, MV-EBA.
50. Remove Electrical Box Adapter and hardware
from the box.
51. Attach H.264 Day/Night SurroundVideo®
surface mount, wall mount or pendant mount
to Electrical Box Adapter. (Image 41)
52. Attach Electrical Box Adapter to Electrical Box
as shown in Image 42-1~4.
Image 42-1 Single gang box
Image 42-2 Double gang box
Image 42-3 Square box
Image 42-4 Square box
Attach to surface
mount, wall mount or
pendant mount
A