Installation Manual
Arecont Vision H.264 Day/Night SurroundVideo
®
Series Installation Manual
11 | Page
34. Using the Mounting template, cut a hole in
surface for mounting.
35. Insert Flush Mount Adapter into the hole.
36. Screw the “lever screws” until the flush mount
is snuggly installed, as shown in Image 31.
The “Support Arm” will ride down the screw to
compress the mounting surface. (Image 32)
NOTE: Do not over-torque the lever screws
37. For installation of the camera shown in image
33, please reference “Mounting the
Camera”.
38. Attach the Trim Ring to the Flush Mount
Adapter by rotating clockwise as show in
Image 34.
Image 31
Image 32
Image 33
Image 34
Lever
Screw
Lever
Screws
Support
Arm
White
Trim
Ring