Installation Manual

Installation Manual
Page | 10 [e-mail]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [e-mail]
MegaVideo® Flex
Mounting the Main Unit
1. Determine a secure location to mount the main unit from the camera. There is a 40ft. maximum
distance from the camera to the main unit.
Mount Procedure for Drywall/Masonry Mount Procedure for Metal Application
Ref #
Description
For Drywall/ Masonry Applications
1
Prepare surface for installation by placing the main unit where desired and marking each of
the four the holes with a pencil.
2
Drill the appropriate size holes to install 4x of the #6-32 1” Drywall/ Masonry Mounting
Anchors (Ref #2) where you marked the pencil holes.
3
Place the holes of the main unit over the Drywall Mounting Anchors and use a Philips head
screwdriver to screw 4x of the #6-32 1.5” Wood/ Metal Sheet Screws (Ref #3).
For Metal/Wood Sheet Applications
4
Prepare surface for installation. Then, insert the 4x #6-32 1.5” Machine Screws (Ref #4)
through the each of the four holes on the main unit.
5 / 6
Thread a #6-32 Washer (Ref #5) into each Machine Screw and then fasten securely with a
#6-32 Hex Nut (Ref #6) on each.