Specifications

90
10. Mobile Server
The Mobile Server is an application that allows GV-Decoder Box and GeoVision mobile
applications to access cameras connected to GV-System. Through the Mobile Server,
third-party surveillance software can also access GV-System using RTSP protocols.
For each camera connected to GV-System, clients can choose to receive from one of the two
streams available. You can set up different settings for the two streams such as frame rate,
codec and resolution. In addition, up to 32 cameras can be arranged into a matrix and the
matrix screen counts as 1 channel when transmitting to clients. The matrix channels are also
available in dual stream.
10.1 Starting the Mobile Server
Follow the steps below to install the Mobile Server:
1. Insert the Surveillance System Software DVD to your computer. It runs automatically,
and a window appears.
2. Click Install V 8.5.0.0 System.
3. Select Mobile Server, and follow the on-screen instructions.
4. Go to Windows Start, point to Programs, select GV-Mobile Server, and then run
Mobile Server. The GV-Mobile Server window appears.
5. To change the server name or to configure UPnP settings, click the Network tab.
Figure 10-1