Specifications

5.2 Temperature Alarm

In the new VSM center, you can monitor temperature of the connected subscriber (GV-IP

Cameras and GV-System with GV-3008 Card only) by checking the current temperature and

setting up a critical temperature upon and beyond which the VSM operator and the

subscriber can be notified..

Note: For the GV-IP Cameras that support temperature display, please refer to the

GV-IPCAM H.264 User’s Manual for detail.

To look up the temperature of the connected subscriber:

On the VSM window, click Tools and select View Subscriber Status. The dialog box

appears. The default unit is Celsius. To configure the units shown, see the following section

for detail.

Figure 5-5

Alternatively, right-click the subscriber from the Subscriber List on the VSM window and

select View Subscriber Status.