Specifications

48
To trigger outputs by event:
1. On the Center V2 window, click the Preference Settings button
and select
Notification. The Alarm Settings dialog box appears.
2. From the left column, select the event type for which the alarm output is to be triggered.
Figure 4-14
3. Select Output Module and define the module number and pin number using the
drop-down lists. The output will be triggered when the selected event occurs.
4. To set up more event types for alarm output, repeat steps 2 and 3.
To trigger outputs manually:
1. On the Center V2 window, click the Tools button
and select Force Output. This
dialog box appears.
Figure 4-15
2. Select a desired module and then click the Finger button
to trigger the output.